Cutting Optimization Pro

• 
  
  
  1D and 2D optimization in
  the same program - you may use the program for both 2D and 1D
  optimization.
  
• Guillotine optimization - The cuttings are performed from one side to
  the other of the material. This feature is very useful for glass, wood,
  thermopan, ...
  
• Non-guillotine (nested) optimization - The cutting machine can follow
  the shape of the material. In this case you need to have a complex
  machine based on laser or flame blade.
  
• Multi-stage guillotine - all cuts in a stage are
  perpendicular to the cuts on the previous stage. The user may specify
  the number of stages and the direction of cuts for the first stage.
  
• 
  
  
  Any number of pieces in the
  REPOSITORY and DEMAND - virtually no limit for the number of pieces
  that you want to optimize.
  
• 
  
  
  Any measurement metric- The
  way in which you introduce the data is a general one. You don't have to
  specify a metric. Just choose a metric in your mind and enter all data
  using that metric only.
  
• 
  
  
  Adjustable cutting blade
  thickness- For glass cutting with diamond the cutting blade
  width is 0, but for wood, metal handling you need a saw blade with a
  greater width.
  
• 
  
  
  Adjustable optimization
  level- One may specify how many layouts to be generated
  before the solution is outputted. If you don't have too much time and
  you don't have a good computer you may set the Optimization Level to a low level. This feature helps you to run
  your program on any kind of computer (from 486 to the best processors
  available today).
  
• 
  
  
  Maximal cut
  length limit - You may specify how long a cut can be. This is useful
  when you perform the cuttings manually.
  
• 
  
  
  Adjustable
  useful waste - all wastes smaller than this size are garbage (will
  not be added to repository).
  
• 
  
  
  Adjustable
  limit for breakable parts - No waste will have a size lower than
  this parameter and no 2 parallel cuttings will be closer than this. It
  is used in order to avoid the breaking of too small material. Useful in
  glass industry.
  
• 
  
  
  Reduces panel waste and costs - By
  using the latest achievements in the field of Artificial Intelligence
  you may obtain reduce the waste by 15%.
  
• 
  
  
  Grain direction control - useful for
  wood cutting optimisation. A parameter let the user to specify if the
  piece can be rotated or it should be kept fixed.
  
• 
  
  
  Automatic offcuts handling - the
  useful waste is automatically added to the Repository of materials.
  
• 
  
  
  Vertical printing of the labels and edge
  bands - this will optimise and simplify your layout.
  
• 
  
  
  Graphical display
  black-white or colourful images and text mode of the obtained results
  - the results are displayed as images (black and white or colourful) or
  as text-tables.
  
• 
  
  
  Save images automatically - all the
  obtained 2D sheets can be saved as bmp images with 1 click. The programs
  automatically appends a number to an image.
  

• 
  
  
  Grouping similar layouts - this will
  reduce the number of printed sheets of paper. The number of repetitions
  for each sheet will be displayed.
  
• 
  
  
  Printing the obtained
  layouts - on any printer.
  
• 
  
  
  Printing multiple layouts
  on the same page - You may print 1, 2, 4 or 6 layouts on the same
  sheet of paper.
  
• 
  
  
  Printing the REPOSITORY and
  the DEMAND of the customer - you may print the pieces that you want
  to optimize.
  
• 
  
  
  The cuttings are shown in text
  format in order to use them with a CNC machine.
  
• 
  
  
  Edge banding handling - the quantity
  and the type of material attached to the edges of the wood sheets is
  manipulated by the program.
  
• 
  
  
  Computes / Prints the total cutting length.
  
• 
  
  
  Displays diagrams - a table which
  contain the pieces cut for each sheet.
  
• 
  
  
  Possibility to
  define complex products such as table, desk, cupboard, locker, book
  shelf ...
  
• 
  
  
  Possibility to
  define types of materials (glass, wood, band) - for each material
  the user has a special table where it can introduce more information
  about the material.
  
• 
  
  
  Automatic
  tool for computing the size of the pieces based on the external sizes of
  the product.
  
• 
  
  
  Statistics related to the
  current cut / layout- At the end of the optimisation process
  you will have access to the: number of cuttings, cuttings definition
  (starting and ending point), number of waste rectangles, the waste
  rectangles (the coordinates of the top-left and bottom-right corners),
  number of utilized pieces, the placement of the utilized pieces, used
  surface, ...
  
• 
  
  
  Saves/loads
  results - All results can saved in txt files and loaded later.
  
• 
  
  
  Generates and prints adhesive labels
  -
  
• 
  
  
  Load data from *.dbt
  (specific files), *.2d (Real Cut 2D files), *.xls (Excel files), *.xml (XML files),
  *.csv (comma separated)
  and *.1d (Real Cut 1D
  files).
  
• 
  
  
  Automatically computing of
  the order price -
  
• 
  
  
  The REPOSITORY and the DEMAND can be sorted - by using various criteria:
  Length, Width, Quantity, Type, Rotation, Labels
  
• 
  
  
  Maximises
  productivity,
  saves time and money ....
  
• 
  
  
  Data can be exported
  into very popular formats: Word, Excel, HTML, CSV (comma separated) and XML files.
  
  
• 
  
  
  All panels and table's
  columns are resizable - You may customize the workspace. The new positions are automatically stored.
  
  
• 
  
  
  Very fast running time - Solutions are obtained within seconds.
  
• 
  
  
  Optimization engines provided by
  Optimal
  Programs Cut 2D X and
  Cut 1D X
  components.
  
• 
  
  
  Interface in multiple
  languages: Dutch, English, French, German, Italian, Portuguese,
  Romanian, Spanish and Swedish.
  

1. Pieces to be optimized are introduced
   in DEMAND. Add data by pressing the
   +
   button at the top part of tables.
   
2. Pieces to cut from (the sheets) are introduced in
   REPOSITORY. The REPOSITORY is automatically handled. In the case of 1D optimization (pipes,
   bars, linear pieces) only one value (either Length or Width)
   must be introduced. The other field must be left empty or set to 0.
   
3. Press the button Start. At the
   end of cutting optimisation the solution will be printed in graphic and text mode. If you are not satisfied with the
   current solution (optimisation) you may press Start again. You may also increase
   the Optimization level from menu Settings | Algorithm.
   
4. If you are satisfied with the current
   solution you may print and save it. Then press Accept. Utilized pieces will be removed and the
   useful one will be added tot the REPOSITORY.
   

• 
  
  Optimizes 2D and 1D materials.
  
• 
  
  Does guillotine, guillotine 2-stage, non-guillotine, nesting cutting
  optimisation.
  
• 
  
  Solves the stock optimization problem.
  
• 
  
  Minimizes (reduce) waste and increase productivity.
  
• 
  
  Maximise material utilization.
  
• 
  
  Reduce cost of the material.
  
• 
  
  Manages sheets of materials with a click.
  

or

Wire transfer:
55 Euro / license (computer)


(only for more than 2 licenses).


ask us for a proforma invoice at:
[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذا الرابط]